What's new at Atoll?
ATOLL DELIVERS NEW 200/300
SIGNATURE SERIES FOR 2018
Atoll Signature series comprises of a superb CD player, CD
transport, two integrated amplifiers and a pre-power
true dual monoblock performance, both integrateds, the
IN200 and separate AM200SE power amp are equipped with 2x330VA transformers and 60,000uF of storage
whilst the PR300 preamplier has a 330VA transformer and 30,000uF of storage. The IN300 has 2x 400VA
toroidal transdormers an 86000uF producing 150W/Ch.
These high spec products enable the most demanding
pieces of music to be played at realistic levels with incredible finesse and
New for 2018 is the matching CD Player CD200SE2 with the ability to
use the integral DAC with external digital devices.
AN INTEGRATED TRUE DUAL MONO 120W/Ch with 2x330VA transformers and
PSU Capacity of 60000
Best of all is the integrated digital
DAC board allowing DSD and PCM together with Bluetooth. (See
Output 120W /
Monoblock design with 2x 330VA
Output stages with discrete
2 pairs of
MOS-FET transistors on each
5 Inputs (1
AUX. for optional Phono or DAC
AN INTEGRATED TRUE DUAL MONO 150W/Ch with 2x400VA
transformers and PSU Capacity of 86000 uF
Best of all is the integrated digital DAC board allowing DSD
and PCM together with Bluetooth. (See below).
– converter: AK4490: S/N: 120 dB dynamic
– DSD: 2.8MHz and 5,6MHz.
– PCM from 16 bits to 32bits up to 384 kHz on USB (asynchronous).
– Up to 24Bits 192kHz on optical and coaxial.
– USB converter XMOS: XHRA-2HPA with specific program for PCM and DSD specially developed for ATOLL.
Analog stages: Mundorf MKP in a armored shell.
Digital stages: Vishay MKP high sound quality.
Double mono with 2x440VA toroidal transformers.
Specific low consumption supply (5VA) for display and logic circuits.
Capacitors: 12x6800uF low ESR high quality designed specifically for ATOLL.
Soft starter stage to avoid current peek.
Internal Supply High End cable (wired according to AC recommendation).
2 volume attenuators: 1 per channel.
High quality Silver Mica capacitors for soft low pass filter (very fast reaction on pulse).
Symmetrical bipolar stages (discrete components).
6 MOS FET per channel: 150Wrms/8Ohm, 260Wrms/4Ohm.
Very low feed global back stages that brings dynamic and natural sound.
Very low distortion due to a specific control stage of the driver transistors.
High quality tellurium copper speakers terminals
(ATOLL exclusive design).
High End Speaker cable link.
Gold plated RCA inputs.
– 5 Inputs (with AUX for optional phono stage)
– 1 BY-PASS Input
– 1 XLR Input
– 2 Optical Inputs
– 1 Bluetooth receiver
– 1 USB-B asynchronous Input
1 pair of speakers OUT
2 Pre-out (for sub or additional power amp.)
1 Trigger Output
1 Headphones jack 6.35mm
Global Remote control
Low noise and consumption OLED display
Black or silver front panel
Power Wrms/channel: 150 Wrms/8Ω
Power Supply: 880 VA
Total of capacitors: 86400 µF
Input impedance: 220 kΩ
Dimensions: 440x320x100 mm
Weight: 15 Kg
CD PLAYER: CD200
audio drive optimized for jitter reduction mounted on an
transformer specifically dedicated to audio
dedicated to digital circuits
7 regulated supplies with one
specifically dedicated for the
Burr Brown converter
PCM1794 24bits/192 kHz, 8x Oversampling
129 dB dynamic, signal/noise
ratio of 129 dB
Current/voltage converters with
ATOLL designed bipolar transistors stages
Output differential stages with
discrete components biased to ClassA
- ATOLL global remote
- Optional External
Digital Source Card 1xUSB Input 24bit / 96k, 1xCoax Input1xOptical
- Remote Control
NOW AVAILABLE WITH OPTIONAL DAC-IN CARD ENABLING
EXTERNAL DIGITAL SOURCES TO USE THE INTERNAL